Other

Wave Washers for adjusting bearing play in bottom brackets.

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

Surly Monkey Nuts v3 Dropout Spacers let you keep that rear wheel nice 'n' perpendicular in those horizontal dropouts, no matter how much of a diesel you are. So go ahead, stomp on the pedals and let the rooster tails fly. They're sold individually because most folks only need one on the drive side.

- DT Swiss cartridge bearings - Sold in pairs

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Shimano Rear Derailleur Pulley Assemblies

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Get your scratched Shimano Dura-Ace shifters looking new again with these replacement name plates. They're perfect for sprucing up a well-used bike or erasing the marks of a crash.

This is a Shimano Dura Ace R9100 Road Brake Cable Adjusting Unit for BR-R9110-RS and BR-RS9010-RS caliper brakes. - Services one brake caliper, front or rear

Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly

Shimano Rear Derailleur Pulley Assemblies

- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1

M15/M26 Alloy GXP Crank Arm Bolt Kit

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

RockShox Reba and SIDB Air Shaft

This kit contains all the parts needed for scheduled maintenance and/or rebuild of B1 Stealth Reverb Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - Requires RockShox Specialty Tools to perform Service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle

RockShox 32mm Seal Kit

Replacement lower hardware for Rockshox forks.

RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.

RockShox 35mm Seal Kit

RockShox 35mm Seal Kit

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

- Color: Black - Length: 8.5 mm - Material: Steel - Type: Hex - Includes: 4 bolts & 4 nuts

Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

CNC machined from advanced performance low friction polymer material, these replacement bushings offer improved fit while reducing friction over stock.

Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

KS Dropper Post Service Parts

KS Dropper Post Service Parts

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Missing Link DLC Chain Link - DLC coating provides high surface hardness - Non directional design for easy assembling - Compatible with KMC and SRAM 12-speed chains - Opening tool required

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

-Seatpost clamp spacer kit for Advanced ISP models (2012-2014)

- Lightweight, durable alloy clamp system designed specifically to work with the Contact SLR Aero Integrated or Contact SLR Aero handlebars for 2018+ Propel Advanced Disc and 2019+ Propel Advanced - Quick easy one bolt setup adjustment and wide-range armrest positioning - Fits Giant Contact SL/Connect SL bar extensions (22.2mm) - Armrest pads included

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Seatpost lever and cable set for Giant's Contact Switch Seatpost

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

- BB30 Bearing, Pair, 230-5026 - 30x42x7mm

- Headset Microspacer - .25mm height each

- Self Extracting crank bolt Suitable for: - Road: Powerbox alloy, Powerbox Supercompact alloy, Energy, Gossamer cranksets - Off-road: Powerbox alloy, KFX, Gradient cranksets

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing